Selling freshly rebuilt Evo, new Evo 7 chassis with custom cage and very stiff welding ready for hillclimb championships/timeattack etc. Car ran in the Romanian Hillclimb since 2019 to 2023, in 2024 we chose to rebuild everything including the chassis. All the operations were done profesionally by the motorsport team Engage Engineering from Brasov, Romania.

Engine 0km, 4G64 block+4G63head ( needs running in. starts and run perfectly )

2.1 configuration

Ferrea competition valves +1 and std. exhaust

Double supertech springs and titanium retainers

GSC S2 camshafts

Pistons Manley 87mm 9.5cr

Gasket 1.2mm

Rods oliver 156mm

Crankshaft zrp 88mm

Exhaust cam gear adjustable

Turbo garrett g30-660

JMF exhaust manifold

Wastegate tial

Bov tial

Skunk2 intake manifold

Motec m800 gold full unlocked

Motec MDC differential controller

Evo X electronic acceleration paddle + Electornic throttle body (when ALS activated it opens, when it"s off, throttle has different position )

Engine mounts inovate

Dogbox Gatmo 0km

Cusco MZ plate front differential

Evo RS plate differential rear

Twin disc clutch 0km

Tilton mastercylinder

Tiltol balance bar

Evo 10 calipers + racing pads Ferodo DS3.11

Hydraulic handbrake 4 conducts billet

Coilovers kw competition + ohlins

Dash aim mxl pista

Rollcage custom cage

Air filter blox 4" velocity

Hardrace rear lower control arm

Whiteline swaybar kit front + rear

Rollcenter correction kit

DIfferential RS pump

Spare parts:

Ex Evo 7 chassis with sparco rollcage

5 gear oem gearbox ( very good condition )

two sets of shock absorbers Ohlins ( on car ) and Kw Competition as spare

sets of wheels: 1x Enkei set, 2x Evo corse sets, 1x street + light spacers

For racing it needs new Engine REMAP + Running in. It can run this map also, was done in the previous engine setup with higher CR Pistons, but it is recommended to make a remap for desired fuel also. Car runs now MOL DRX ( bioethanol ).

The electrical part is new also and made profesionally, if you remove engine you have only 1 big socket to remove and that"s all.

For sure I have forgotten lots of parts to be mentioned, if have any question please ask via whatsapp.

Car can be viewed near Bucharest, Romania